4532-6007 Series Data Sheet:

Solder-in RF Filters are ideal for use in critical areas where space does not allow use of mounting tools or hardware. The solder-in feature also allows installation in unison with other board mounted components. Primarily used in filtering signal/data lines and DC power lines.

Small size to allow effective use of space
Voltage ratings to 500 VDC
High temperature construction to prevent reflow during installation
MIL-F-15733 QPL versions available

* Dissipation Factor:≤3%

* Insulation Resistor: ≥3000MΩ (at 25℃)

* Withstand Voltage:
250VDC,one minute No Short Circuit,No Failure(Rated Voltage:100VDC)
125VDC,one minute No Short Circuit,No Failure(Rated Voltage:50VDC)

* Temperature Feature:
-55℃  +125℃(X7R,SL)
-25℃  +85℃(X5V/Y5U)